Adler 867 Manuel de service télécharger pdf (Page 39)

Operating instructions

Operating manual 867 Version 01.0 - 12/2012 37

Automatic

residual thread

monitor

For machines with automatic residual thread monitor:

If the hook thread needs to be replaced, the LED indicator

lamps (2) light up on the machine arm. The left light is for the left-

hand hook and the right light is for the right-hand hook.

Figure 15: Residual thread monitor

The bobbin plate has vision slots on one side.

Important: Insert the bobbin in the hook in such a way that the

vision slots (1) are at the top. Otherwise the residual thread mon-

itor will not work.

5.6 Thread tension

The tension of needle thread and hook thread determines the

position of the thread interlacing. If the tension of needle thread

and hook thread is high, the thread interlacing lies in the middle

of the material to be sewn.

Figure 16: Thread interlacing

–

(1) - Vision slot on the bobbin (2) - LEDs on the machine arm

(1) - Identical needle thread and hook thread tension

(2) - Hook thread tension higher than needle thread tension

(3) - Needle thread tension higher than hook thread tension

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 119 120

Pas de commentaire

Adler 867 Manuel de service Page 39